Medieval Engineers | How to Add Mods

  • Medieval Engineers How to Add Mods, medieval engineers how to add mods, Medieval Engineers, medieval engineers, How to add mods, how to add mods, How to Add Mods, How to add Mods
  • 5
  • Print

    How to Add Mods:
    1. Stop your server
    2. Follow steps 1-5 here to open your worlds sandbox.sbc file
    3. Find a mod that you want on the workshop (eg. https://steamcommunity.com/sharedfiles/filedetails/?id=440847161)
    4. copy the number at the end (for the example it would be 440847161)
    5. Open your worlds sandbox.sbc file and find '<Mods />
    it should look like this:

    <Mods />

    6. Change it so that it looks like this (minus the square brackets):

    <Mods>
        <Mod>
            <Name>[number from step 3].sbm</Name>
            <PublishedFileId>[number from step 3]</PublishedFileId>
        </Mod>
    </Mods>

    For more than 1 mod it should look like this (Again minus the square brackets)

    <Mods>
        <Mod>
            <Name>[number from step 3].sbm</Name>
            <PublishedFileId>[number from step 2]</PublishedFileId>
        </Mod>
        <Mod>
            <Name>[number from step 3].sbm</Name>
            <PublishedFileId>[number from step 3]</PublishedFileId>
        </Mod>
    </Mods>

     

    If you have done it correctly the mods will load up and your Sandbox.sbc file should look something like this

    <Mods>
    <Mod>
            <Name>294555339.sbm</Name>
            <PublishedFileId>294555339</PublishedFileId>
        </Mod>
        <Mod>
            <Name>294534489.sbm</Name>
            <PublishedFileId>294534489</PublishedFileId>
        </Mod>
        <Mod>
            <Name>294617824.sbm</Name>
            <PublishedFileId>294617824</PublishedFileId>
        </Mod>
        <Mod>
            <Name>295393216.sbm</Name>
            <PublishedFileId>295393216</PublishedFileId>
        </Mod>
        <Mod>
            <Name>297207615.sbm</Name>
            <PublishedFileId>297207615</PublishedFileId>
        </Mod>
        <Mod>
            <Name>294621451.sbm</Name>
            <PublishedFileId>294621451</PublishedFileId>
        </Mod>
        <Mod>
            <Name>296437598.sbm</Name>
            <PublishedFileId>296437598</PublishedFileId>
        </Mod>
    </Mods>

    7. In the main server config (Game panel > Configuration files > MedievalEngineers-Dedicated.cfg) make sure the world where you just edited the sandbox.sbc is set as persistent or the mods will disappear
    8. Start the server

    NOTE: If you have copied the mods list from your game on your PC make sure to remove this line from each entry <ModItem FriendlyName="">

    Troubleshooting Steps

    So you have just set up all the mods you wanted but now you can't connect to your server? Just follow this guide

    1. Have you waited long enough? To download the mods from the workshop, unpack them and add them into your server can take a few minutes.
    2. Are you sure you have formatted them properly? Even a single missing [ will stop is from working
    3. Are all the mods you have added in date/still working/public?
    4. Finally, remove all the mods and add them one by one to see which one is stopping it
     
     

    Looking for a game server host known for brilliant 24/7 customer support and quality hardware?

    Try a Pingperfect Medieval Engineers server today! https://pingperfect.com/gameservers/medieval-engineers-game-server-hosting-rental.php

     


    Order now - Use code KNOWLEDGE15 for 15% off

    Was this answer helpful?

    « Back